unit price: 27480 €
|Sizes (WxDxH)||4000x2000x3200 mm|
|Working volume||1000 l.|
|Full volume||1600 l.|
|Mash-wort kettle heating power||60 kWt|
|Mash-wort pump||Ebara DWO-150 1,5 kWt|
|Pump productivity||42 m3/h|
|Mixer motor power||1,1 kWt|
|Mixer parameters||180 n/m with adjustment of turns|
|Raker motor power||0,37 kWt|
|Raker parameters||3,5 rpm; 420 n/m|
|Kettle weight (empty)||410 kg|
|Lauter tun weight (empty)||300 kg|
|Pipelines diameter||42 mm|
Two vessels brewhouse BH-1000 consists of:
Attention! The control panel is not included in the basic equipment of the brewhouse. We offer several different control system options for the client's choice.
The full volume of all vessels is 1600 liters.
All units of the brewhouse, all valves, the pump and the surfaces in contact with the product are made of food grade 304 stainless steel. All internal surfaces of the tanks and welds are polished to the required degree. The surface inside the containers is a polished.
For the convenience of the brewer, the management of piping cranes is brought to the working platform, on which the control panel is located.
Mash-wort kettle is equipped with a mash mixer with speed control, inspection hatch, measuring line, temperature sensor and lighting inside the boiler, two rotary spray balls with connection to CIP-agregat, bottom drain for mash and top drain for wort without sediment.
The lauter tun is equipped with removable filter plates, a grain raker, an inspection hatch, lighting inside the tun, two rotary spray balls with connection to a CIP-agregat, and a hatch for unloading grain with a folding tray under it.
The kettle and tun have ventilation pipes for steam exhaust, are insulated with polyurethane foam, sheathed with stainless steel food.
The working platform is made of corrugated stainless steel sheet with comfortable steps and handrails made of polished round pipe.
The control panel performs the following functions: adjusting the temperature of the mash/wort, adjusting the temperature of heat carrier, turning on and adjusting the speed of the pump and mixer, turning on the raker and internal lighting of the tanks. Execution via touchscreen with programming of temperature pauses is possible.